Super Sale - 10% off Everything plus FREE Delivery on orders over £199! Discount applied automatically at the checkout. Delivery Times: Please note - All products are made to order and take 1 week from order to delivery.

Made‑to‑Measure Bath Panels – UK‑Manufactured, Moisture‑Resistant MDF Panels. FREE UK DELIVERY!

GBP £

Bath Panel Sizes Explained: The Complete UK Guide

Bath Panel Sizes Explained: The Complete UK Guide

Choosing the right bath panel size shouldn’t be confusing — but for most homeowners, it is. Bath panels come in a mix of standard and non‑standard sizes, bath heights vary, and older bathrooms often don’t match modern dimensions.

This guide explains every bath panel size, how to measure correctly, and what to do when your bath isn’t a standard size. Whether you’re replacing an old panel or fitting a new bathroom, this is the definitive UK sizing guide.

 

Quick Size Summary

  • Standard front panel lengths: 1500mm, 1600mm, 1700mm, 1800mm
  • Standard end panel widths: 700mm, 750mm, 800mm
  • Standard height: 480–520mm (adjustable with plinths)
  • L‑shaped & P‑shaped panels: manufacturer‑specific
  • Non‑standard baths: choose Cut‑to‑Size Bath Panels
  • Always measure the bath itself, not the old panel

1. Standard Bath Panel Sizes (UK)

Most UK straight baths follow a small set of standard lengths and widths. These are the sizes you’ll see across most retailers and manufacturers.

 

Standard Front Panel Lengths

  • 1500mm
  • 1600mm
  • 1700mm (most common)
  • 1800mm

Browse: Standard Bath Panels 

Standard End Panel Widths

  • 700mm
  • 750mm
  • 800mm

Browse: End Bath Panels

 

Standard Bath Panel Height

480–520mm 
This varies because bath legs are adjustable and many panels include a plinth to fine‑tune the height.

If your bath height is unusual, choose a panel with a plinth or go custom.

 

2. How to Measure Your Bath Correctly

Most fitting issues happen because people measure the old panel, not the bath. Here’s the correct method.

 

A. Measuring the Front Panel

Measure:

  1. Length — wall to outer bath edge
  2. Height — floor to underside of bath rim

If the floor is uneven, measure both ends and use the tallest point.

 

B. Measuring the End Panel

Measure:

  1. Width — wall to outer bath edge
  2. Height — same method as above

C. If your bath is tiled in

 

Measure the visible opening, not the bath shell.

 

D. If your bath is boxed in

You may need to remove the old panel to measure accurately.

 

3. When Your Bath Isn’t a Standard Size

This is extremely common — especially in older homes or bathrooms that have been retiled.

Typical non‑standard scenarios:

  • Bath length is 1650mm, 1720mm, 1685mm, etc.
  • Bath height is too tall for standard panels
  • Bath sits in a tight alcove
  • Floor is uneven
  • You need to work around pipework or boxing

Your solution: Cut‑to‑Size Bath Panels

We manufacture panels in our UK workshop to any length, height, or width.

Shop: Cut‑to‑Size Bath Panels 

 

4. Bath Panel Heights Explained

Height causes more confusion than length.

Why height varies:

  • Adjustable bath legs
  • Uneven floors
  • New flooring added after installation
  • Deeper bath shells

Typical height ranges:

  • 480mm — low baths
  • 500mm — standard
  • 520mm+ — deeper or raised baths

If your bath height exceeds 520mm, choose:

  • A taller panel, or
  • A cut‑to‑size panel

5. L‑Shaped & P‑Shaped Bath Panel Sizes

 

These panels are not universal — they must match the exact bath model.

L‑Shaped Panels

Typical sizes:

  • 1700mm front
  • 700mm or 850mm return

Browse: L‑Shaped Bath Panels 

P‑Shaped Panels

Typical sizes:

  • 1700mm front
  • 700mm or 850mm return
  • Curve radius varies by manufacturer

Browse: P‑Shaped Bath Panels 

 

6. 2‑Piece Panels

These panels includes:

  • A main front panel
  • A lower plinth

Benefits:

  • Adjustable height
  • Ideal for uneven floors
  • Easier installation
  • Better plumbing access

Browse: 2‑Piece Bath Panels

 

7. Bath Panel Materials & Thickness

MDF Bath Panels (recommended)

  • 15–18mm thick
  • Strong, rigid, long‑lasting
  • Moisture‑resistant options available
  • Can be cut cleanly for perfect fit

Browse:

Acrylic Panels

  • 2–5mm thick
  • Lightweight
  • Flexible
  • Not suitable for cutting

8. Choosing the Right Size: Quick Decision Guide

 

If your bath is a standard size

→ Choose a standard front panel + standard end panel

If your bath is slightly off‑size

→ Choose Cut‑to‑Size Panels

If your bath height varies

→ Choose a panel with plinth

If you have an L‑ or P‑shaped bath

→ Choose the panel for your exact bath model

 

 

Helpful Links

 

Need a bath panel made to your exact size? 
We manufacture custom bath panels in our UK workshop — cut to your exact measurements with fast dispatch.

👉 Shop Cut‑to‑Size Bath Panels 

 

Share this article
Pinterest
Leave a comment
Your email address will not be visible