Custom Made Commercial Grade Bath Panel; All Colours / Finishes and Styles;

Custom Made Commercial Grade Bath Panel; All Colours / Finishes and Styles;

If you are specifying for any refit or building project then these panels are the perfect choice, water resistant core with a waterproof PVC coating. These are guaranteed not to blow.

Enter Length and Height in milimeters

Upload diagram of panel required if possible

Choose Image

Description

Commercial Custom Made WR MDF Bath Panels

This is a Top Quality, British Made Bath panel. Can be used in high moisture and water risk areas such as Hospitals, Nursing homes and Hotels where there is a high risk prolonged water exposure. The most forgiving bath panel available.

Hand Built using MEDITE^® WR (water resistant) MDF
Foil wrapped (not sprayed like cheaper units)
Scratch Resistant
Hard wearing
Colour matching? please select a swatch sample from Here before you buy your panel.
Easy Clean
Available in 15mm or 18mm Thicknesses
Fitting Instructions Included
Supplied with Stainless steel screws to fix panel back to a frame or battening ( not supplied )
Supplied with Colour matched self adhesive screw head covers
Manufactured in our UK Factory
Life Time Guarantee

CUSTOM SIZES
Please enter your customisation requirements in the box above.

You can have any length panel up to 1900mm and height up to 600mm. Bespoke cut outs for pipes, shelving, Skirting and anything else that may obstruct your panel, Upload your drawing with your requirements, Remember to allow a tolerance of 3mm top, bottom, left and right for that easy fit as not all tape measures are 100% accurate.

Please allow 5 - 7 working days delivery for custom size panels as these are made to measure.

Question: How do I measure my Bath?
Answer:
Use a Good Tape Measure to get the Length and Height of the Bath Panels Required. All Standard sizes are available from the Drop Down Fields above. If your size is not in the drop downs then you may require Custom Sized Bath Panels.

For more info download our full measuring guide.

Installation Guide Lines:
Please note these products are wood based and must be securely fixed to a suitable bath frame for the best possible finish. Please follow our fitting instructions or use our specially designed Hidden Bath Panel Fitting Kit for a screw less finish.

Frequently asked Questions

Question: What is a Bath Panel Lip?
Answer:
A bath panel lip is a 5mm x 5mm extension to the top edge of the bath panel, it is useful on installation of the panel to slide under the edge of the bath to keep the top of the panel flush. This can however make installation tricky as most baths have an uneven under edge. For best results opt for a panel without a lip and fix the panel securely to your bath frame or battens surrounding the edges of the bath.

Question: Why install a Sealing Strip?
Answer:

The combination of soft and hard PVC creates a special strip perfectly suited for protecting the bottom of Bath Panels. Installed in this manner strip seals the bottom of the plinth against dirt and water.

Reviews