Proudly Manufacturing in the UK-27209-p.jpg?v=96733738-9d83-4021-b201-98330e0e4827)
-27209-p.jpg?v=96733738-9d83-4021-b201-98330e0e4827)
-24159-dv-p.png?v=96733738-9d83-4021-b201-98330e0e4827)
-24159-dv-p.jpg?v=FB3F6A1E-C47B-419C-A55B-E9693249C4D8)
-24159-p.jpg?v=57E9A5B8-3201-41BC-BBBE-BAE0223CB310)
Professional MDF Split Custom Sized Bath Panels
Hand Made from moisture resistant MEDITE MDF, ideal for bathrooms. These are Top Quality, British Made Bath panels, Custom size up to 1900mm w x 600mm high.
This is a Tongue and Groove Effect Panel which has been split vertically through a middle vertical line of the design to make installing the bath panel easily between small gaps.
- Plinth can be fitted behind or in front of main panel
- Scratch Resistant
- Easy Clean
- Hard wearing
- PVC Vinyl wrapped for a perfect non fade finsh
- Manufactured in the UK
- Fitting instructions included
- Easily Drilled or Cut with a Sharp Hand Saw
- Includes clear protective film which should be removed before installation
- Certifications: FSC - Wood from sustainable forests, CARB2 Compliant
- Life Time Guarantee *
These panels make installing your panel much easier as you will not have to cut it to fit, it also means that your Life Time Guarantee is not invalidated.
If you require a custom size panel in this colour then please click here
You can have any length panel up to 1900mm and height up to 600mm.
Installation Guide Lines:
Please note these products are wood based and must be securely fixed to a suitable bath frame for the best possible finish. Please follow our fitting instructions or use our specially designed Hidden Bath Panel Fitting Kit for a screwless finish.
Question: What is a Bath Panel Lip?
Answer:
A bath panel lip is a 5mm x 5mm extension to the top edge of the bath panel, it is useful on installation of the panel to slide under the edge of the bath to keep the top of the panel flush. This can however make installation tricky as most baths have an uneven under edge. For best results opt for a panel without a lip and fix the panel securely to your bath frame or battens surrounding the edges of the bath.
Question: Why install a Sealing Strip?
Answer:
The combination of soft and hard PVC creates a special strip perfectly suited for protecting the bottom of Bath Panels. Installed in this manner strip seals the bottom of the plinth against dirt and water.
Answer:
Use a Good Tape Measure to get the Length and Height of the Bath Panels Required. All Standard sizes are available from the Drop Down Fields above. If your size is not in the drop downs then you may require Custom Sized Bath Panels.
Customer reviews
| Finish: | Various |
| Brand: | AQUACLOAK |
| Product Code: | GwhiS1pCusttg |